Sony BRAVIA 9 II 65-inch (K-65XR90M2): dimensions, VESA, weight and specs
As an Amazon Associate I earn from qualifying purchases. We don't accept payment for placement. Details
Short answer
The K-65XR90M2 measures 56.9 × 32.5 × 1.8 in without its stand (35.7 in high on it), weighs 58.6 lb and mounts with VESA 300x300 mm. It’s a 2026 RGB LED TV with a 120 Hz panel; sit 6 ft 6 in to 8 ft 10 in away.
The Sony BRAVIA 9 II RGB LED in the 65-inch class (K-65XR90M2) is a 2026 RGB LED TV. Every number below is from Sony’s US spec sheet, re-typed into our own table; the few we work out from it are marked.
Note from the spec sheet: 4K 120 Hz on HDMI 3 and 4 only. Pedestal (‘Mirage’) stand on 65, 75 and 85 inch.
Specifications
| Spec | K-65XR90M2 |
|---|---|
| Screen class / measured diagonal | 65 in / 64.5 in |
| Screen (picture area), W × H (derived) | 56.2 × 31.6 in (143 × 80 cm) |
| Without stand, W × H × D | 56.9 × 32.5 × 1.8 in (145 × 83 × 5 cm) |
| With stand, H × D | 35.7 × 13.4 in |
| Stand width | 13.5 in pedestal |
| Weight without / with stand | 58.6 lb / 67.5 lb |
| VESA wall-mount pattern | 300x300 mm |
| Display type | RGB LED: RGB LED, local dimming |
| Refresh rate | 120 Hz native, VRR up to 120 Hz |
| HDMI inputs taking 4K 120 Hz+ | 2 of 4 |
| HDR formats | Dolby Vision, HDR10, HLG |
| Broadcast tuner | ATSC 3.0 (NEXTGEN TV) |
| Anti-reflection (as marketed) | none marketed |
| Model year / spec sheet read | 2026 / November 12, 2026 |
Will it fit?
On furniture. Its pedestal needs a furniture top at least 17.5 in wide (13.5 in plus 2 in each side) and 14.4 in deep. On its own stand the screen’s center sits 19.5 in above the furniture top, so a 21 in high stand puts it at a typical seated eye height of 40 in.
On the wall. The TV uses VESA 300x300 mm and weighs 58.6 lb without its stand. Allow about 58.9 × 34.5 in of clear wall (1 in each side). It will stand off the wall by its own 1.8 in plus the mount’s depth, which the mount’s own spec sheet gives. See how to choose a wall mount. To compare it with other TVs against your own room, use Will it fit?.
How it compares with other 65-inch TVs
Of the 18 65-inch models in our catalogue, the K-65XR90M2 is the 10th narrowest and the 17th lightest. 65-inch TVs we list run 56.5–57.4 in wide and 36.6–59.7 lb without the stand. Full table: 65-inch TV dimensions.
Where to sit
For a 65-inch screen: 6 ft 6 in from your eyes for an immersive picture (40° of view) to 8 ft 10 in for relaxed viewing (30°). See the viewing distance calculator.
We haven’t tested this TV. For measured brightness, input lag and reflections, see an independent lab such as RTINGS.
Frequently asked questions
What are the dimensions of the K-65XR90M2?
56.9 in wide, 32.5 in high and 1.8 in deep without the stand; 35.7 in high and 13.4 in deep on its stand. The picture itself is 56.2 × 31.6 in.
What VESA mount does the K-65XR90M2 use?
300x300 mm (width × height between the screw holes), from Sony’s spec sheet. Choose a mount that lists 300x300 and is rated for at least 58.6 lb.
How much does the K-65XR90M2 weigh?
58.6 lb without the stand and 67.5 lb with it.
How far should I sit from the Sony BRAVIA 9 II 65-inch?
6 ft 6 in (immersive, 40° of view) to 8 ft 10 in (relaxed, 30°), eyes to screen.